2014 pro anti stab kit ?

[lookup]

Putting a 3" on with avid extrovert on the outside not the center drive. and bought a wahl anti stab kit and was wanting to know if I could use the same hole the rail tips used, to mount my anti stab kit ? or if I needed to use the holes for the limiter strap Any help would be helpfull

 

[Robbie]

http://www.avid-products.com/custompage.asp?pg=inst-drivers

 

[JonezyBones]

Go off of the directions above. And I recommend using red loc-tite on the anti-stab bolts. I've went through 3 different sets in the last two seasons because the bolt backed itself off.

 

[lookup]

if I look at that right I need to put it right behind the bolt that holds the hyfax if I measured it right, just want to make sure measure twice and cut once just seems like a lot to cut off

 

[hanson summit]

Definitely don't put them in the holes from the tips. Tried that. Don't do it. You will wreck your drivers reeaaaal fast. I then installed it where the limiter strap shaft was and trimmed.