2013 YZ450 build with 15 LT

[montucky]

Just completed my Snowbike build. Here are a few pic of the build. Does anyone know if they make a prefilter for the YZ450 or do you just make do with the standard Pre Filter for all the other bikes. Was not able to reinstall Fork guards and ideas there?

 

[Adobe-Al]

Nice Job on you build, i run the pre filter only(no stock filter). Also did your chain fit or did you have to change the sprocket? Thanks

 

[montucky]

chain fit great

 

[Adobe-Al]

Stock 13 tooth and 69 links?

 

[montucky]

I think so. Just installed what they gave me.

 

[Adobe-Al]

Thanks, my chain was too long and hits the track after I set the tension. I was just wondering if I'm the only unlucky guy.

 

[montucky]

Are you on a YZ or KTM?

 

[SLDHVN]

Outerwears makes a prefilter just for the YZ cage. I had one and it worked great.

 

[Ken Climb]

The Yami's look so sweet!

 

[kevinhoglund]

Long chain

Thanks, my chain was too long and hits the track after I set the tension. I was just wondering if I'm the only unlucky guy.

04 KTM 525. Same thing

 

[montucky]

Outerwears makes a prefilter just for the YZ cage. I had one and it worked great.

I dont know why TS does not include this in the fit kit for the newer YZ's

 

[dirtrebel]

here it is, my yamaha shop could not find it from gytr.
http://www.outerwearsracing.com/proddetail.asp?prod=928956

 

[pruner]

Just installed my 15 ST kit last weekend on 13YZ and the suggesetion was a 12 front, stock on the bike ia 13. I got a couple of hrs on it and i think it could be geared taller first gear i never use and i can go down a road with 2' of fresh heavy snow in 5th with no power problems most of my riding is in 3rd and 4th even in the trees. Note i live at 1500' in Michigan. Any ideas?

 

[mnsnowhawk]

The Timbersled website says 13 tooth. That's what I would see if I could get to fit.

 

[montucky]

This might be cheating but it works.

 

[deeko2007]

do you have any problems with snow blocking the intake on your yz?

 

[pruner]

For the fork guards a used Moose neoprene fork guards there like a sock you can get 5" or full length, i went full length i think they were only $25

 

[montucky]

do you have any problems with snow blocking the intake on your yz?

I haven't had it real deep pow yet. I did order the correct filter skin form outerwear. and plan on foaming up the intake and drilling holes on side panels and covering with frogskins

 

[PalousePoo]

Run the 13 countershaft sprocket. I tried a 12 once, its too low. 13 is the recommended size