2013 White RMK Pro SC 163 with many extras, $8,750
2013 White Pro SC with less than 1,000 miles on it. 4 year warranty (1 year+ remaining, ends in October 2016) Check out the extras below:
- SLP Mohawk Skis with Ski-Z deflectors for extra cooling (runs no higher than 135 degrees on hard trails)
- All 4 WE Shocks revalved by Carl's (Fox internals) Heavy spring on rear track shock now but I have the stock spring too
- Extensive venting including additional intake venting in front of the instrument panel
- Aluminum Skid plate under the lower quick drive pulley
- Narrowed Pro-Taper bars and ODI grips (I have the handlebar hooks but I don't use them) 1" riser that can be removed if not desired
- Camoplast X3 162" track and Avid 7 tooth drivers
- Carl's clutching with their helix, springs and 62 gram Belly Buster weights
- Polaris Tunnel Bag with shovel compartment
- Ski Doo Reversible Ice Scratchers (same as on the T3)
- Rear tunnel braces (just installed)
This sled has run perfectly from Day One. It pulls 8200 plus with the X3 track. I have well over $16,000 in it. The Camoplast X3 and drivers modification were close to $2,000 installed. Sled was serviced in January and new clutch springs were installed. Additional pictures available on request. Call or text Bob at (208) 250-5139 or PM me if interested. I am in Eagle, Idaho. I will deliver to a reasonable distance.
2013 White Pro SC with less than 1,000 miles on it. 4 year warranty (1 year+ remaining, ends in October 2016) Check out the extras below:
- SLP Mohawk Skis with Ski-Z deflectors for extra cooling (runs no higher than 135 degrees on hard trails)
- All 4 WE Shocks revalved by Carl's (Fox internals) Heavy spring on rear track shock now but I have the stock spring too
- Extensive venting including additional intake venting in front of the instrument panel
- Aluminum Skid plate under the lower quick drive pulley
- Narrowed Pro-Taper bars and ODI grips (I have the handlebar hooks but I don't use them) 1" riser that can be removed if not desired
- Camoplast X3 162" track and Avid 7 tooth drivers
- Carl's clutching with their helix, springs and 62 gram Belly Buster weights
- Polaris Tunnel Bag with shovel compartment
- Ski Doo Reversible Ice Scratchers (same as on the T3)
- Rear tunnel braces (just installed)
This sled has run perfectly from Day One. It pulls 8200 plus with the X3 track. I have well over $16,000 in it. The Camoplast X3 and drivers modification were close to $2,000 installed. Sled was serviced in January and new clutch springs were installed. Additional pictures available on request. Call or text Bob at (208) 250-5139 or PM me if interested. I am in Eagle, Idaho. I will deliver to a reasonable distance.
Last edited:
