I did a search I know there is a posting on here telling what is all need to make a 2013 engine work in a 2011 sled. Try to find out what needed to make injectors work. For some reason I do search and cant find it. Any help would be great. Thanks
2013 Engine into a 2011
- Thread starter polaris88
- Start date
Anyone??
I would think just a ECU to match engine because it is real difficult to flash a 11 ecu to a 13 unless you have a good dealer .
I think I just bought a 600 engine off you ?
I think I just bought a 600 engine off you ?
S
Sixat38
Well-known member
This link may help. But the way I understand it... if you use all the electronics from the '11 and, also, the fuel rail & injectors from the '11 you should be able to drop the motor in & go. If you're mixing different MY ECM with different MY injectors, etc. you will have problems. Not insurmountable problems but it will require extra work. And $.
http://www.snowest.com/forum/showthread.php?t=368859
http://www.snowest.com/forum/showthread.php?t=368859
Yes beamslayer if you are the one getting the shift motor yes that is me. lol I know everything will work on the 11 setup onto the 13 motor. The only thing I think is a problem is the injectors fitting into the 13 motor.
No problem on swapping, just use the '11 electronics/fuel system with the '13 motor. You have to use an aluminum spacer if your '11 still has the '11 injectors in it, if the '11 has the "updated" injector, just bolt everything together. Most '11s already have the "updated" injectors in them and will work and do not need the spacer.
Hope this helps.
Already did the exact swap myself.
Hope this helps.
Already did the exact swap myself.
Cool!!! Thanks a lot. So how do I know if they are been updated? Also if they have not been updated what is the spacer I need? Need to make it? Or I can buy it? Thanks again.
