2013-15 Polaris Pro quickdrive gears / sprockets

[sledhed]

2013 Polaris Pro quickdrive gears / sprockets, also fit Axys and 2014-15 Pro

ANOTHER SET FOR SALE: 2013 Polaris Pro quickdrive gears / sprockets, upper and lower, stock. Also guaranteed to fir 2014-15 Pro and 2016-18 Axys with quickdrive system.

NOTE: With 2016 and newer quickdrive Axys sleds this gives you a GEARDOWN using stock Axys belt, bolts, drivers etc., cheap gear-down to 2.3x effective ratio with the 7 tooth factory drivers... if in doubt, search snowest (using google) to find threads on this gear down method.

Good condition. $150 (NOW $140) shipped for top and bottom gears anywhere in lower 48. Any other location ask and I can figure out shipping.

If you want a new or used 13-15 QD belt (updated versions) just let me know, I have a couple used and one new laying around.

 

[frntflp]

Interested .......thinking .......

According to Polaris website -
15 Pro is 21T upper, 44T lower, 2.095 ratio, belt 2206328
18 Axys is 22T upper, 43T lower, 1.95 ratio, belt 2206046

What's the difference between the belts ? Material ? Length (hope not) ?

 

[sledhed]

Interested .......thinking .......

According to Polaris website -
15 Pro is 21T upper, 44T lower, 2.095 ratio, belt 2206328
18 Axys is 22T upper, 43T lower, 1.95 ratio, belt 2206046

What's the difference between the belts ? Material ? Length (hope not) ?

With the Axys, you switch the sprockets to the Pro-ride set and continue to use your stock Axys quickdrive belt. My understanding is the Axys belt is a different length than the Pro-ride, but the material and tooth pitch are the same. There are a couple threads on this in the Polaris performance discussion forum sections, the easiest way to find them is Google search with "site:www.snowest.com" tagged onto the end... if I had them handy I would post up the links. I talked to a guy yesterday who has been running the Pro gears on his Axys for like a thousand miles or more with no problem whatsoever. Not that a dealer "sanctions" this but he works at a Polaris dealership... I am thinking of hanging on to one set in case I find a deal for a used Axys that I can't refuse...

 

[sledhed]

2015 set is sold. 2013 set is still for sale, I would take $140 for those shipped anywhere in the lower 48. I know they fit onto a 2013 shaft as well as 2015 shaft so they will fit an Axys belt drive shaft guaranteed.

 

[sledhed]

Difference, not

Here is a short video showing the bottom gear free play on a 2015 drive shaft, first is the 2013 gear, second is the 2015 gear, free play looks virtually identical to me, and I know the 2013 bottom gear fits both the 2013 and 2015 shafts and parts guys at Polaris said if it fits a 2015 shaft it will fit the Axys shafts as they are identical. All other measurements on the bottom gear are identical - offset, width, number of teeth, and the top one is identical part number to newer models as well.
https://photos.app.goo.gl/SIMxZ98Ogxg0Y7c02

 

[sledhed]

Gears were sold BUT I picked up a 2013 as a second sled so I have another set for sale.

I also have two used and one new Pro quickdrive belts left I would part with, about 1000 miles on one, unknown miles on the other (came with sled as a spare) but it looks really good.

I would sell that belt for $75 plus a little to cover part of the shipping cost (split the cost), to the lower 48. It is the updated quickdrive belt since it was original on my 2015 Pro.

 

[sledhed]

TOP - another set of 2013 gears for sale off second sled I just picked up... QD belts too...

 

[sledhed]

SOLD the 2013 set through facebook... so I have one 2015 set left but I think I am going to keep those in case I sell either Pro I can keep the Kurts geardown kit...