2012 Pro RMK need help trouble shooting

[rookie99]

So I just had my 2012 Pro RMK in for its first service a couple of weeks ago. The dealer adjusted the TPS and a few other standard checks. I got the sled back and all was good for a few rides. Come last week when I took it out, after it warmed up from playing around, it would not idle down when you come to a complete stop. It holds the RPM at about 3400 RPM and the odd time that it would idle down, it would take about 30 to 45 seconds to drop down but for the most part it wouldnt even idle down (it almost feels like the clutch is not down shifting either). I took the sled home and put the heat to it thinking maybe some moisture was in there. I took it out last night and the idle issue was still there but not as bad and half way through my ride when just putting along and burping the throttle, I could here a squeak in sequence with the throttle burping? The squeak sounded like it is coming from the clutch side. I plan on taking it into the dealer but thought I could do a little research first. Any help, comments or suggestions would be appreciated.

 

[xc6rider]

Pull the cover, inspect the spring, then re-install the cover without putting the primary spring back in. Check that the clutch (moveabke sheath) has full range and smoothly.

It may be a bad bushing in the cover, or its binding up somehow.

 

[beamslayer]

Does the flipper come all the way back,is their play in the flipper ?

 

[mikkohen]

So I just had my 2012 Pro RMK in for its first service a couple of weeks ago. The dealer adjusted the TPS and a few other standard checks. I got the sled back and all was good for a few rides. Come last week when I took it out, after it warmed up from playing around, it would not idle down when you come to a complete stop. It holds the RPM at about 3400 RPM and the odd time that it would idle down, it would take about 30 to 45 seconds to drop down but for the most part it wouldnt even idle down (it almost feels like the clutch is not down shifting either). I took the sled home and put the heat to it thinking maybe some moisture was in there. I took it out last night and the idle issue was still there but not as bad and half way through my ride when just putting along and burping the throttle, I could here a squeak in sequence with the throttle burping? The squeak sounded like it is coming from the clutch side. I plan on taking it into the dealer but thought I could do a little research first. Any help, comments or suggestions would be appreciated.

Same problem here. What was the problem. I have 2013 Pro RMK 155". Dealer ordered new TPS.

 

[Dazzler]

If the throttle cable is not to tight, I would guess it's the TPS or moisture in the TPS electrical connection plug on the throttle bodies!