2011 pro stock shock lengh?

[harf69]

Does anyone know if the 05 mseries shocks are the same length as a pro? I've got zbros shocks on my my m6 and I was thinking if they will fit I'd put them on my pro

 

[mountainhorse]

17.5" are stock... I like to run the FTX recommended 17.25"

You'll have to get them re-sprung and re-valved for your sled and shimmed to the right length...

You would be better off selling them and getting a set of springs and custom valving on the stock PRO RMK shocks you have IMO.



.

 

[Rev Kev]

17.5" are stock... I like to run the FTX recommended 17.25"

You'll have to get them re-sprung and re-valved for your sled and shimmed to the right length...

You would be better off selling them and getting a set of springs and custom valving on the stock PRO RMK shocks you have IMO.



.

I had my Stock Walker Evans Custom Revalved, and New Triple Rate Springs from Raptor, Have $150 into Both Shocks, Including Springs. But I did the Shock work myself, $30 into new Shims.

 

[harf69]

Ya but the m series are the same length as my pro

 

[CROW]

Throw them on, try it out and report back. It won't cost you anything and you can't damage the shocks or the sled, so why not?

Sent from my DROID RAZR using Tapatalk

 

[harf69]

That's what I was thinking and I valved them for my wife with gear at 135 so they might be perfect for it worse case I pull them. The ones on my pro are supposedly revalved walker Evans shocks but I'm not sure. What are the top rated rears?both rear shocks for my pro