2011 M8 secondary

[se3racing]

Are there two different size rollers on the secondary clutch? I brought the BDX hi-temp rollers a set of 6. I notice my clutch only compresses 3/8 of an inch. Ive taken it apart twice everything seems correct. I look at the parts manual and there are two different size rollers.

 

[smokindave]

part number 50020 look to all be the same size.

It looks like you just need to turn your helix as it looks like in your picture that it is bound up...then loosen your compressor making sure it doesn't bind as you take pressure off spring


Sent from my iPhone using Tapatalk

 

[Rixster]

It will only compress 3/8 to 1/2 inch with your compressing blot on it. After that much travel the center hub of the clutch bottoms out on that giant washer on your compressing bolt.

 

[arctic2009]

Are there two different size rollers on the secondary clutch? I brought the BDX hi-temp rollers a set of 6. I notice my clutch only compresses 3/8 of an inch. Ive taken it apart twice everything seems correct. I look at the parts manual and there are two different size rollers.

The post on the clutch is hitting the washer/nut that you are compressing the clutch with.