2011 800 PRO WITH A ENGINE SHAKE AT 5000 RPM'S MORE ON DESELL

[walker]

INSPECTED MOTOR MOUNTS THE ENGINE DOES MOVE UP AND DOWN. MORE ON THE RIGHT SIDE. THE STAR RUBBER MOUNTS LOOK LOOSE. IF I CHANGE THESE, WILL IT MOST LIKELY FIX PROBLEM. OR DO I NEED TO DO MAIN MOUNTS ALSO. ANY INPUT WOULD HELP. SORRY FOR THE CAPS. DID NOT REALIZE THEY WERE ON TILL TO LATE.

 

[BILTIT]

Do all the mounts, there is an updated motor mount kit for the '11.

Polaris P#2204633

 

[walker]

What all comes in the kit

Thanks could not find part # what comes in this kit

 

[BILTIT]

http://www.polarispartshouse.com/oemparts/a/pol/503ef171f8700222b8490103/engine-mounting-all-options

12,19,21 included in kit.

 

[walker]

Do I have to remove engine to install these mounts

Is engine removal needed

 

[BILTIT]

I don't think so, I had mine out at the time though.

 

[Murph]

Is engine removal needed

No. Remove primary clutch and muffler.

Remove and replace motor mounts one at a time.

The kit has a pretty good instruction sheet in it, and gives the recommended order of R&R.

I would also check clutch/ motor alignment at the same time.

 

[walker]

thanks

Thanks