2010 M8 162 track alignment

[Coldfinger]

Is it just me or are the tracks on these machines just a biotch to align so that they don't rub on the plastic rub strips on either side of the tunnel?

Trying to align the rollers to be in the middle of the drive cogs and keeping the track from rubbing on the left side is very difficult.

Someone mentioned in another thread about installing some spacer washers on both sides of the tunnel to give a little more clearance for the track. Anyone else do this and if so, what size/thickness of washers?

Thanks.

 

[papdog7]

to tell you the honest truth i think its impossible to not get it to not rub on either side of the tunnel i have a 2010 m8 153. both sides are pretty well worn off (the plastic peices) with the track that loose suppose to be like 2.5 inches with 10lbs of weight or something somewhere around there. i was wondering the same myself if ur at a stand still and u look at ur track and push on the ground with ur feet to the side it moves the sliders over on the track clips. so im declaring it damn near impossible from what i have seen lol. but if u do find a way or someone else please tell id love to know also