i am installing my holz front end on my 09 d8.everything is fitting fine but im trying to adjust my spindle camber and have found the tie rod end that threads thru the top a arm and mounts to the top of the spindle to be approx. 1/2 inch to short to set the camber correctly.the arms and hardware have been triple checked but i could be missing something?how has everyone elses holz kits fit?any help would be greatly appreciated.
2009 holz a-arms/spindle help...
- Thread starter wej388
- Start date
we it should be a drop in...any chance you have the arms on the wrong side or flipped over?mine has the upper end screwed almost all the way in to get proper camber....
yeah mike...its close using all the threads,just doesent quite make it.ive triple checked the arms for correct fit,and checked it again with the pic from holz website.im thinking i may be able to find a longer rod end somewhere?im gonna finish tightening everything up and maybe it will fix itself!!!
can you snap off a couple pics and post em so we can see what it looks like...
i can email ya mike,if u wanna pm me ur address...
PM sent...
camber
Have seen the same issue on my 2007 I just ended up useing up all the threads and dealing with the extra camber. Let us know what you find.
Have seen the same issue on my 2007 I just ended up useing up all the threads and dealing with the extra camber. Let us know what you find.
Similar threads
