2007 RMK Dragon (SLP Clutching?)

[R J]

Is the slp recommended clutching for the 2007+ RMK dragon with slp single pipe and can all that needed versus the stock clutching?

Cost versus what you actually get in notable differences.

 

[milehighassassin]

Slp does a great job with their setups.


Sent from my iPhone using Tapatalk

 

[MORSNO]

Are you looking for clutching for riding in MN or at elevation out west? Here in Alaska (way out west) we have to adjust the clutching for our lower elevation vs. the stock set up. Normally a new spring and heavier weights in the primary, 10-68's or 10-66's are pretty common.

 

[R J]

I understand that. Mainly looking for the application of 7-10k and if it's worth the coin. I have been happy with the stock Polaris clutching using one set lighter weight then recommended but is the slp set up with their mtx stuff all that?

 

[NapaMatt]

id try a different helix..

64-44-.36

 

[SnowRider1]

I have close to the recomended SLP setup in the wife's 07. I beleive that it is 62 gram base MTX weights, black primary spring, stock helix, and black secondary spring. Revs to about 8,400 in Island Park at 6,000' elevation. 8,150 here in Nevada at 8,500'. My 2010 is pulling 65 gram base MTX's in the same elevations, but is geared down 1 tooth less than the 07 and the clutch has been balanced. SLP will list their springs for the primary and I just used the stock Polaris springs as both of the machines liked it.

 

[R J]

Thanks for the info. Good times!