Went riding with a buddy yesterday his 07 started dying and bu beeper on all the time. We unplugged the bu motor which stopped the beeper but the dying problem continued. We could let it sit for a few minutes then it would restart and run ok, but as the day progressed the run time continued to decrease till it would only run for a few seconds. We had to tow in. It was flashing a code of 1 long and 2 short, any body have a code definition for this? Thanks
2007 M1000 code problem
- Thread starter oregontopcat
- Start date
I had same sort of problem last season after a collision with an other sled.On impact the plugs on my cpu came off when hooked up everything my back up beeper came on for most of the ride out till it quit working and sled ran crappy all the way out.After replacing the whole from end over the summer it still was screwed so I took to dealership. It was nothing serious just one bent pin on connection to cpu.Once straightened and new beeper it worked perfect.Hope this helps.
Cheers,
Dave
Cheers,
Dave
Thanks, I will look at those pins closely!
