S
Sasksummit
Member
Ok just changed the crank on this engine. Put it back in runs fine goes into reverse but I have no lights no tack no accesories? What would cause this? Everything is hooked back up.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Replace the relay that is zip-tied above/behind the secondary clutch. Common problem, carry a spare. AR272 at NAPA will work, much less $$ than from a dealer.
Mine is having a similar issue. My RPM gauge stops working in addition to my odometer and the oil light comes on if I just let it idle. I was told to change that relay and it did me no good. When I drive my sled, I have a huge lack of power if I don't keep the choke half on. I hope somebody can shed some light on this issue. Is your sled running okay?
Sounds like your idle is low causing your tach and such to drop off line, also sounds like your carbs need cleaning if you have to add choke to get it to run right. My best guess is your carb cleaning will fix both your problems.