mp_2009 Well-known member Lifetime Membership Feb 12, 2009 #21 compression Where i live is about 3200ft and i had 120psi on both sides for compression
7 76FOMOCO Well-known member Feb 12, 2009 #22 as long as each was with in 10% of the other you will be fine (was the motor warm or cold) they read low on cold and higher when warm. but a little low over all.
as long as each was with in 10% of the other you will be fine (was the motor warm or cold) they read low on cold and higher when warm. but a little low over all.
mp_2009 Well-known member Lifetime Membership Feb 12, 2009 #23 the cylinders were really cold it was like 2 hours after i rode it into the garage and i got 120 psi in each cylinder at 3200ft
the cylinders were really cold it was like 2 hours after i rode it into the garage and i got 120 psi in each cylinder at 3200ft
B big dave New member Feb 14, 2010 #24 Just checked my 04 carb today. Have D&D head and 1010. Motor was cold, hadn't been started. Got 138 each cyl.
Just checked my 04 carb today. Have D&D head and 1010. Motor was cold, hadn't been started. Got 138 each cyl.
S strand71 Free Member Feb 17, 2010 #25 decompression holes?? What exactly are you talking about there? Did do this so they start easier?
mp_2009 Well-known member Lifetime Membership Feb 17, 2010 #26 yeah its almost like a decompression lever just makes the motor turn over easier
