I crashed my rmk 800 around christmas bought a parts sled but i cannot get the bolt that holds trailing arm to the sled off. It is bent from the crash any ideas?
2003 rmk 800
- Thread starter michael3030
- Start date
If its bent in the tube then you are out of luck... not to mention you'll need to replace the mount/tube anyway.
If its just the end that is bent, I've been able to slip a fine toothed sawsall blade between the bushing and the bulkhead tube and cut them off then get them out.
But I'm guessing you have it bent in the tube and in that case its just going to require replacing the mount.
sled_guy
If its just the end that is bent, I've been able to slip a fine toothed sawsall blade between the bushing and the bulkhead tube and cut them off then get them out.
But I'm guessing you have it bent in the tube and in that case its just going to require replacing the mount.
sled_guy
