2000 Gen2 800 Reverse PERC??

[DBLE_O]

Anybody know if I can put a PERC on my 2000 RMK? I know id have to get a reverseable water pump,will the VES water pumps interchange the older big blocks? Any help would be helpful.

 

[johnsodo]

yes you can do it oil pump, cdi, fly wheel, clutch, wiring

 

[DBLE_O]

know of a kit supplier?

 

[rmkboxer]

good luck, there are no kits. you have to change the flywheel, tried it w/o and it would not run. maybe get a 700 kit and put it on. it will have a different timing curve but you probably wouldn't notice the difference. ebay

 

[B.A.]

rmkboxer: You mention getting 700 parts, I own a 2000 700 RMK and I would like to put reverse on it. I honestly don't know how the reverse works, would I still need all of the parts you listed or can I short cut this?

 

[snodogg]

not sure if this helps you out but I added PERC to an 03 edge. Perc was first released by Poo mid-year of the 03 model year and was available as an upgrade kit. I had to replace wire harness, oil pump, cdi, LH handlebar control, secondary, and tach.

I'm skeptical it can be done on anything previous to 03.

 

[snodogg]

with perc the engine runs backwords, unlike a reverse gear on the older models. Advantage to PERC is there is no added weight.

 

[NapaMatt]

i had a 99 sks with a 800 in it.. i put perc on it works MINT