1M track question

[zrmodman1]

04' 1M, And im wondering what size lug i can fit on the sled without going to a smaller driver? 2.31? 2.5?

 

[diggerdown]

2.5 fits easy, not sure about a 3"

 

[Lank]

X2 for the 2.5, I know it fits...would be interested to know if the 3" fits.

 

[zrmodman1]

Thats what i wanted to hear! But now ya have me wondering about the 3" :eyebrows

So whats everyones 2 cents on the best track to use? Should i go with a 16in wide track or stay with the 15in wide track? Its a 159 camo now,And i have the 9in wheels so i was going to go with 162 track......And should i stay with the 2.52 pitch drivers or go with a 3 driver?(so many questions)

 

[Dinger1]

if you change it to a 162 you will need 3 in drivers. friend of mine has a 162x16x2.5 camo extreme, its nice.

 

[mp_2009]

i have a 162x15x2.5 on my king cat and as far as i know its stock on that part of the sled

 

[greeneman]

You will have to go with the 3 pitch driver and 16 wide will fit but she is close on the sides. I would buy what ever width you could get the best deal on.

 

[zrmodman1]

Found a good deal on a 159x16x2.3 so going to go with that......what is the stock driver size on th 04 800 1m....10t? And the shaft size? Thanks for the info guys.

 

[Idcatman3]

Stock sprockets and driveshaft:

1602-247 SPROCKET,DRIVE-10T-7.94 DIA

1602-376 SHAFT,DRIVE-1 1/4" HEX-SOLID

That 159x2.3 is a 2.52" pitch isn't it? If so, you don't even have to change drivers.

 

[ccpowder]

Buy a 2.4" x 159" x 2.52" pitch Series IV Polaris track, you wont be sorry!!

 

[zrmodman1]

Stock sprockets and driveshaft:

1602-247 SPROCKET,DRIVE-10T-7.94 DIA

1602-376 SHAFT,DRIVE-1 1/4" HEX-SOLID

That 159x2.3 is a 2.52" pitch isn't it? If so, you don't even have to change drivers.

Thats why i went with it,I just didn't want to change drivers. Thanks catman!

I almost went with that polaris track,but i wanted to go 16in wide...