W Wa. sledr Member Lifetime Membership Apr 8, 2012 #1 Will a 166 skid and track off a 05 900 bolt up to a 08 Dragon 163? Thanks in advance.
harrysmith500 Well-known member Lifetime Membership Apr 8, 2012 #2 Yes, but you have to change your drivers from 2.86 to 2.52. I was going to do this on my D8, but I found a 163" setup for a good price. I still wish I had a 166" or 174" though
Yes, but you have to change your drivers from 2.86 to 2.52. I was going to do this on my D8, but I found a 163" setup for a good price. I still wish I had a 166" or 174" though
W Wa. sledr Member Lifetime Membership Apr 8, 2012 #3 I take it that the drive shaft and drivers for the 05 will not swap over?
harrysmith500 Well-known member Lifetime Membership Apr 8, 2012 #4 Pry not, but I don't know. Subscribing for the answer!
sled_guy Well-known member Premium Member Apr 8, 2012 #5 The drive shafts don't swap, you'll have to swap the drivers. There is enough room on the tunnel extension. I would just use a little set of rail extensions instead of swapping the whole suspension. But if you have the suspension it will bolt in. sled_guy
The drive shafts don't swap, you'll have to swap the drivers. There is enough room on the tunnel extension. I would just use a little set of rail extensions instead of swapping the whole suspension. But if you have the suspension it will bolt in. sled_guy
SixtySevenGT Well-known member Premium Member Apr 12, 2012 #6 166 Skid -- If you need one let me Know--
Z-Man Well-known member Premium Member Apr 12, 2012 #7 I think an 06 drive shaft may swap in but not an 05 one.
M mikemiler Free Member Feb 17, 2013 #8 I just put a 166" skid out of an 05 in my 2010 dragon 800. It fit perfectly but the 166" track is a 2.52 pitch. That 166" does dominate in the deep pow.
I just put a 166" skid out of an 05 in my 2010 dragon 800. It fit perfectly but the 166" track is a 2.52 pitch. That 166" does dominate in the deep pow.