Will a 159" x 15 x 2" x 2.52 fit on an "02" 800 RMK Edge 156" with little to no modification????
156" Track to 159" HELP!
- Thread starter jhicks64
- Start date
S
Snocross 100
Member
In my opinion you should just do rails. Ice age rails are 350$ with the tipped up rails u got it will want to wheelie walk everywhere. plus it will be way stronger than stock!
You don't need to do anything but move the skid back about 1". The holes are already there in the brackets (front and rear), you just need to drill them the rest of the way through.
I agree with Winterbrew. I have done this to several with no problems of any kind.
X2 for WB's comment.
The 159 is only 1.5" longer on the rail... some of that can be sucked up with adjustment..the other with the skid relocation.
Tracks usa has a smoking deal on the 159" x 15 x 2.125 series IV tracks right now.
The 159 is only 1.5" longer on the rail... some of that can be sucked up with adjustment..the other with the skid relocation.
Tracks usa has a smoking deal on the 159" x 15 x 2.125 series IV tracks right now.
if your the one that asked about my 156 skid then yes it will work. you can move the skid back, or do what i did, get and offset axle/8in wheel kit and run it in the stock locations. i had the 159 series IV from a '03 vert escape on mine. i still have the track if u are interested in that as well. but it has a few lugs missing/torn.
add a 8" big wheel kit to the rear and it will make up the difference. simple kit, with 8" black plastic wheels , cheap and will give you better rolling resistance.
pm if you need one and we can help you out.
pm if you need one and we can help you out.
