13 Pro with SLP Pipe & PAR 13.6 head

[jakey-boy]

Day #2 on the new map yesterday and definitely much better. Pulled 2 grams out of the MDS weights and didn't have any det or over rev issues. Was pulling about 81-8200 most of the day at 9-11k.

For those with mds that is just the hex screw on the tip with no washers. Black Purple secondary spring is a must for high elevation as well.

 

[IQRIDR]

Day #2 on the new map yesterday and definitely much better. Pulled 2 grams out of the MDS weights and didn't have any det or over rev issues. Was pulling about 81-8200 most of the day at 9-11k.

For those with mds that is just the hex screw on the tip with no washers. Black Purple secondary spring is a must for high elevation as well.

Glad it is working well for you.

I definitely reccomend the black/purple to anyone riding over 2k elevation honestly. It just holds the RPM much better and I measured no additional sheave or belt heat when developing our clutch kit for the Pro RMK.

 

[sledhead84]

2012 Pro RMK 163

HI
Could you e-mail me a map for a starting point as well. Thanks
sledhead84@hotmail.com

I've got a 12 with a 13.6:1 PAR head and am installing a full AAEN exhasut.
Thanks
Chris

 

[D McGregor]

13 Pro 155

Can You send me that pvc map

2013 Pro
12.5 slp head
slp pipe and can

 

[D McGregor]

13 Pro 155

Sorry

darinmcgregor@telus.net