13 PRO Brake

[ENDO1]

For those who have their 13s, can you lock your brake ? never could get my 11 Pro or my friends 12 Pro to work, hoping they made a change for 13.

 

[Oregonsledder]

For those who have their 13s, can you lock your brake ? never could get my 11 Pro or my friends 12 Pro to work, hoping they made a change for 13.

The 11-12 PRO's require a good grip, but everyone I have been around all lock into the park position. You may want to work on your hand strength a bit.

 

[ENDO1]

The 11-12 PRO's require a good grip, but everyone I have been around all lock into the park position. You may want to work on your hand strength a bit.

Had several people try to lock mine, only ever fond one person who could lock it and he is able to bench press 450 lbs and has hands bigger than both of mine put together, then once locked only he could unlock it. I admit, I have trouble with my wrist now days, but I am no weakling.

 

[trackvs2wheels]

Honestly can't say I have ever tried...

Nonetheless, I am sitting here at work squeezing my stress balls building up the forearm strength just in case I have to

 

[Excalibur]

They do require a good squeeze. But we have locked ours frequently.

 

[AndrettiDog]

Same here, it takes some grunt but my '11 works fine. I only lock that while it's in the trailer.

 

[Snodawg]

Honestly can't say I have ever tried...

Nonetheless, I am sitting here at work squeezing my stress balls building up the forearm strength just in case I have to

Uhhhmmmm???? No Comment!!

 

[spider]

yeah, my '13 locks with a good squeeze

- thanks for giving me a reason to go out to the garage and drool on it some more...

 

[Aussie Niko]

Yep mines a pain in the arse!! you have to really squeeze hard then push the clip across.

 

[t stone]

Honestly can't say I have ever tried...

Nonetheless, I am sitting here at work squeezing my stress balls building up the forearm strength just in case I have to

Hell brotha you get cought on this forum and squeezing your balls at work your boss is going to fire you. HAHAHA

Stone

 

[Matte Murder]

Mine was hard but not that hard. Take a file to the notch and remove a little metal. All you need is enough hydraulic pressure to hold the brakes on a little. Dont go too far, hard to put the metal back so sneak up on it.

 

[crf118r]

They're hard to lock because they are already dragging and too tight! Mine's hard, but I can get it done when needed.

 

[Dootimes2]

Mine and the wifes 12's were a pain. She could not do it with both hands. Easy fix is to pull the lever pin and grind on the rounded part that pushes on the hydraulic pin. Grind a little then check and grind more to get the feel you want. This does not effect the brake function at all. She can now lock hers with no problems at all. Took all of 15 min to do both sleds.

 

[Outlaw525s]

Mine locks just fine of my 12, and my 13... ni problems at all!