D
I rode my 2012 800 Pro 163 with SLP stage 2 installed this weekend. I can get 8050 to 8100 RPM on the flats sinking in about 8' to 12 ". When I climb in the same conditions the best I can get is 7800 RPM. I am not dissapointed with the performance but was wondering if I should shoot for 8100 RPM climbing and let the flats end up where it will since I spend most of the time on the hill. I run 8000 to 10,000'. I did not install the SLP weights since did not want to mess with torquing the clutch to 300 +ft lbs. What weights are working for this set up without totally disassembling the clutch? Thanks in advance for your input.