08 600 HO with 144"....PERC suddenly doesnt work!

[mtbroncrider]

ok, just got this for the wife

we took it out for the second time today, and PERC doesnt work

any ideas where to start looking?
Idle seems to be fine @ 1500

dont know where to start....and i dont have much time before i'll miss the rest of the season

 

[BB454]

Perc

Reverse button grounds the wire momentarily when you push it. Look for a loose connection. You can chase it back to the ECU and try grounding it right there. If it goes into reverse then you know your problem is in the wiring. If not it is the ECU.

 

[jsledder]

I had the same problem with a sled I recently bought, turned out to be the connection at the switch, one of the pins was pulled out of the connector completely.

 

[mtbroncrider]

worked today....no idea....idle seems to be low, so i adjusted it up and works fine

might need to rejet it

 

[skibreeze]

Idle seemed low to me, if it happens like that again, just give it a little bit of throttle while hitting reverse.