07 Adrenalin riser bar

[drscotch]

The old site is spitting out errors so I can't do a search.

What size riser bar can I install on my 07 Summit Adrenanlin 800R without any wiring or brake line mods? I'm thinking 10" might be about right?

Thanks

 

[deadcat]

10" works, you will need to do some minor rerouting.

 

[XX Rev XX]

just put a 10" on the other day and didnt have any issues. Didnt even have to re route anything.

 

[sledjunky3]

what risers did you buy?

 

[drscotch]

The only 10" I can find in stock anywhere local is a powermadd. www.powermadd.com, they seem pretty popular from what I can tell. Price is decent too.

 

[deadcat]

You can stack a 2" on top of the stock. Just drill out the threads and get longer bolts.

 

[drscotch]

You can stack a 2" on top of the stock. Just drill out the threads and get longer bolts.View attachment 3367

So are you running a 2" stacked or a 10" per your post above? My stock riser is about 7.25" so the difference is 3/4" between the two options.

 

[deadcat]

So are you running a 2" stacked or a 10" per your post above? My stock riser is about 7.25" so the difference is 3/4" between the two options.

A 2" riser stacked on top of the stock 8" X riser. If it is only 9.25" I have been exagerating its length. Never done that before.

 

[XX Rev XX]

Put on a 10" Powermadd. It was only $38 and a lot easier and cleaner looking than drilling and stacking riser blocks. DID NOT REROUTE ANYTHING. Works great.

 

[drscotch]

Done. 10" Powermadd. Piece of cake. Thanks guys!