So finally finished picking up an 06 yz250 that needed a complete rebuild.I think this bike rips, is super agile and is a blast to ride. Below is the list
Derek Harris porting to accept a ktm250sx piston
(when I got it at first there were so many roughed up ports combined with smooth ports I thought what did I buy) More on this...
Lectron 38mm HV
PST carb heat
Raze heated handbars
Polished trans-This was surprisingly besides the porting my favorite thing. Shifting under power is buttery smooth.
Balance crank
I was building this for my wife and son... Rode it today to get it dialed in ... there was about 15 inches of powder with somewhat of a base.
The porting job is freakin awesome... It gave a bug increase through the powerband to the point the gears it can pull equaled my cr500 with a 15 timbersled LT. The porting job has really gave this bike enough pop to get the front ski up and I am 220 without gear..... but it is still able to pull the power rpms and shift with ease.
I put an EGT on and the Lectron out of the box was perfect... go figure no tuning
This thing handles amazing and is so light and flickable that I could see picking this bike as the bike of choice is there is not super deep powder
At the end of the day I ended up with a super nice bike basically new everything $6800 all in with a new kit...
https://www.dropbox.com/s/pwpkj21f7quzsbm/IMG_20180306_122139.jpg?dl=0
https://www.dropbox.com/s/ecvrs4xpuj8uzvn/IMG_20180306_114415-EFFECTS.jpg?dl=0
Derek Harris porting to accept a ktm250sx piston
(when I got it at first there were so many roughed up ports combined with smooth ports I thought what did I buy) More on this...
Lectron 38mm HV
PST carb heat
Raze heated handbars
Polished trans-This was surprisingly besides the porting my favorite thing. Shifting under power is buttery smooth.
Balance crank
I was building this for my wife and son... Rode it today to get it dialed in ... there was about 15 inches of powder with somewhat of a base.
The porting job is freakin awesome... It gave a bug increase through the powerband to the point the gears it can pull equaled my cr500 with a 15 timbersled LT. The porting job has really gave this bike enough pop to get the front ski up and I am 220 without gear..... but it is still able to pull the power rpms and shift with ease.
I put an EGT on and the Lectron out of the box was perfect... go figure no tuning
This thing handles amazing and is so light and flickable that I could see picking this bike as the bike of choice is there is not super deep powder
At the end of the day I ended up with a super nice bike basically new everything $6800 all in with a new kit...
https://www.dropbox.com/s/pwpkj21f7quzsbm/IMG_20180306_122139.jpg?dl=0
https://www.dropbox.com/s/ecvrs4xpuj8uzvn/IMG_20180306_114415-EFFECTS.jpg?dl=0
Last edited: