06 Rev 151 - Simple Mod's

[BC-XP]

So my buddy just bought a used 06 Rev 151. Bone Stock Except for MBRP Can.

So are there any simple mod's that give good bang for buck as far as clutch & Gearing? Ride Alpine 5,000 -7,000 ft.

Not looking for heads or motor mods, just simple adjustments or bolt on pull the cord and go type mods.

 

[High Voltage]

Mine rans best 8000-8100rpm ,it comes with 440 jets.I droped to 430 and .25 inch reed spacers . Give Big John a call for new helex in secondary and reed spacers about $75 .Then your ready to rip. HV
Big John #612-718-3861

 

[quickdraw]

Mine rans best 8000-8100rpm ,it comes with 440 jets.I droped to 430 and .25 inch reed spacers . Give Big John a call for new helex in secondary and reed spacers about $75 .Then your ready to rip. HV
Big John #612-718-3861

I have A kit from BJ for my 06 that is for sale if you want it. I used for a week then went a different direction. Nice kit, it will stretch your arms on the low end.

HPS can workes great on the 06. Lose 12 lbs and gain some low end grunt.

 

[Motley Doo]

Some flow-rites of other vents couldn't hurt!

 

[revrider]

The 151's could use some gearing down from what I here.

 

[TruckerBallZach]

Get some quick clickers for your primary I adjust mine almost every time I ride depending on snow conditions theyre awesome! Also theres a little hole behind the secondary where the tunnel bends around, fill that with silicone to keep snow from seaping in.