05-06 900 IQ Throttle/ Oil cable replacement

[jafraune]

Any new of the longer ones coming in soon? I need one...extended all the wires brake lines etc....just need the throttle cable now.

 

[FatBoyzfrenchy]

I received another request for a long cable, anybody else sitting on the fence about getting an order in please let me know now so I get it in.
FBF.

 

[jafraune]

I received another request for a long cable, anybody else sitting on the fence about getting an order in please let me know now so I get it in.
FBF.

Just got my order in for a long cable. TTT for ya Claude.

 

[nmmiles]

Sent in my request a few weeks ago. People who are still waiting please hurry so we can get this order in.

Thanks,
Nolan

 

[jafraune]

Sent in my request a few weeks ago. People who are still waiting please hurry so we can get this order in.

Thanks,
Nolan

Nolan, he told me that the order should be at his door two weeks from Monday. FYI

-Jack

 

[BIGGDAWG]

TTT.... Anyone with a 900 or 2006 700 should have this cable in thier sled...

REGARDLESS of weather or not your oiler cable is shot YET...

IMO..

i second that MH i have bought 4 of these and they are top notch and awesome. the way it should have been from the factory.

 

[guidoxpress]

TTT..
get these babies ordered/installed before the snow flies..you will thank yourselves later on...
FBF is an outstanding guy to deal with...

 

[jafraune]

He should have them in less than a week! Order up!

 

[fitler]

PM and email sent. Any chance of getting a long cable?

Thanks

 

[MacDawg productions]

I'm keen on the upgrade. Let me know when you've got the longer ones FBF!!!!!

 

[welb]

I am needing a standard cable for a 4" rise.

 

[nmmiles]

x2! Let me know when the long cables get in!

 

[LPIdaho]

Got the cable installed;
Very impressed, great product.


If you are thinking about getting one DON'T mess around, do it!

 

[dmj1]

sent you a PM i will take standard 4 inch riser

 

[atcfan]

oil pump adjustment

i just installed my new cable and just want to make sure the oil pump is adjusted correctly. the line on the oil pump arm lines up with the line on the housing is that correct mine is set so that the line on the arm is a tad bit below the housing line. should i raise it up or leave it. can i adjust it by using the nut that is closest to the thumb throttle that has a rubber boot over it since i have the throttle bodies already mounted. i noticed the web site for instructions for installing it is off line now too.

 

[jafraune]

Did you guys recieve your cables lately? I ordered mine a few weeks ago and havent heard from Claude since????

 

[guidoxpress]

cable install

i just installed my new cable and just want to make sure the oil pump is adjusted correctly. the line on the oil pump arm lines up with the line on the housing is that correct mine is set so that the line on the arm is a tad bit below the housing line. should i raise it up or leave it. can i adjust it by using the nut that is closest to the thumb throttle that has a rubber boot over it since i have the throttle bodies already mounted. i noticed the web site for instructions for installing it is off line now too.

YES..the line on the pump aligns with the line on the pump lever..
if they are not perfectly even that is ok...AS long as it is as close to straight as possible..or you can tighten the cable to where the line on the lever is just ABOVE the line on the oil pump..in this case you would be using just a slight bit MORE oil..which is fine..but never allow the lever to go below the pump line (lean) cause you could lean it out at idle..

Make sense

you can adjust the line by handlebars to even the line marks up BUT you might increase your idle rpm..so its up to you if you want to increase your idle or take the time to yank the throttle bodies off again and get in there..(but you can adjust the lever w/o removing the throttle bodies if you take your time)

welcome to the 900, and to snowest...

if you need more info..let me know.

 

[atcfan]

makes perfect sense thanks for the help.

 

[guidoxpress]

your welcome..

i had it moved to the 900 sub-forum to help with searching...

this cable is also a great replacement for the 06 6mk 700 (755) if it has not been mentione dyte..have one my wifes 06 700 and it is highly recommended on them as it is on the RMK 900s...

get one for your sleds now!!!

 

[MacDawg productions]

I haven't heard anything about the cable yet. Hopefully soon!!!!! I really don't want to put the old one back in