03 edge rmk skid in gen 2

[thedieselshop]

I am installing a 03 edge rmk 144 skid in a 97 rmk 136 and am looking for the measurements to drill the new holes in the tunnel.
thanks in advance for the help

 

[Team Wild]

You should put this in the edge forum. This is Gen 2. I wish I could help but I can't Sorry.

 

[X2Freeride]

Not sure that the 144 is the same as the 151 or 159 if someone can clarify that it is Id be glad to go take the measurements.

 

[chadkrump]

X2, 144 measurements and 151 measurements are different...

I do have the measurements thou

from the front side of the DS to the center of the first hole should be 9 13/16"
and 5 1/8" down center from the front hole to the center of the rear hole is 27 15/16" and 5" down.

they are the same measurements from a 136 skid to the 144 skid, so honestly if you took out a 136 skid you should be able to bolt the 144 back in.

hope this works for ya

CK

 

[thedieselshop]

got the skid installed this weekend.
The measurements were perfect!!
thank you

 

[chadkrump]

Glad theeasurements worked for ya, you will enjoy that edge skid


CK