turbo

I have a 2012 arctic cat m800 snopro 162 with a race gas turbo. It has a camoplast track but is missing a couple of lugs. This sled runs amazing. It has all of it's updates done. I run avgas/100ll fuel in this sled being able to push 9 to 12.5 pounds of boost. This sled still has another year of...

2009 Polaris 800 155 with pump gas boondocker Turbo. Has boondocker fuel controller, Koso air/fuel gage, and a brand new electric boost controller ($800). Sled has 2200 miles but only 200 miles on the mountain tech "fix kit", a must for the 800 CFI motors. Has ARS upper and lower aftermarket...

09 polaris dragon 800 turbo 155 - $6000 2009 Polaris 800 155 with pump gas boondocker Turbo. Has boondocker fuel controller, Koso air/fuel gage, and a brand new electric boost controller ($800). Sled has 2200 miles but only 200 miles on the mountain tech "fix kit", a must for the 800 CFI...

How do you tell when the bearings and seals in the center of the turbo are worn out? I have a 2009 boondocker TM8 with 4000mi running 10-12 psi and am just curious if this is something I need to consider replacing this summer. Sled is running well, but i can feel a slight amount of play on the...

Selling a camoplast 163" extreme series track off a 2009 800 dragon turbo. It is in great shape, missing part of one lug ( NOT DOWN TO FIBERS). Track has about 500 miles on it, ran 8-10# the whole time. Great track, putting sled back to stock. Make me an offer. I will ship. Call 208-880-6439 I...

With the music: LNNluLqpclc Without music (mobile friendly): TZvABN0MJxU

2008 Polaris 800 Dragon Turbo 155" Holz/Fox Floats, and more Colorado Springs, Colo 08 Polaris 800 Dragon Turbo, Garrett big Turbo, complete Fresh engine rebuild 400 miles ago, when the turbo was installed, it was completely rebuilt, with new cases, the crank was sent to SLP, and completely...

I've been reading on here that some guys running straight pipes have been melting their side panel and belly pan. I am curious if anyone can explain to me why this is happening cause I am curious. It makes no sense to me that if you put a free flowing pipe on there with no restrictions that it...

I have an 09 M8T with a non vented oil tank. I've been thinking of ideas to vent it for obvious reasons and suddenly i remembered plumbing my boiler in my house and the automatic air vent i used to get air out of the system. Can anyone come up with any idea as to why one of these wouldn't work...

Hey guys, I have an 03 polaris 700 edge, Mitsu turbo, electric oil pump, electric fuel pump, battery, etc.. The issue is, the sled quit charging the battery, I have thrown a stator at it, and two regulators, The stator had one brown wire cut and moved, I am told this "supercharges" the stator...

I bought a 06 m7 with a areo turbo and a pure logic box. I rode out the first day without any problems more then getting used to the different riding style needed.at the end of the day i was getting the hang of it. The second day I was riding it the same way and it would bog and hiccup after i...

2009 Arctic Cat Turbo Snowmobile - 09 M8 pump gas BD Turbo 162, EBC, inner cooler, TDR reads, Koso guage, 162 power claw, Holtz reworked shocks, BD vented side covers, RK tech hood riser, guage console riser/tilt billet bracket, handle bar riser forward 2". Sled has 1283 miles, great condition...

2005 POLARIS 900 TURBO 162" ***$5800.00*** GREAT RUNNING SLED...TURBO PROFESSIONALLY INSTALLED. HAS UPDATED CLUTCH, CRANK, BLOCK WITHIN 500 MILES. NEW CAMOPLAST 2.5 EXTREME TRACK LAST YEAR. SINGLE OWNER. 2.5" TRACK. VERY WELL MAINTAINED. RUNS VERY STRONG. $ 5800.00 MAKE OFFER. CALL AL @...

I have a 12 pro with 900 miles on it. Never had any issues with TPS sensors or anything really. I ran the PAR head and can, mds weights last year. Now have added SLP pipe and power commander and par helix but not too sure if it will be enough. Is it a good idea to put a new turbo kit on a sled...

Great Deal !! 09 M8 Turbo W/ inner Cooler (SOLD) 09 M8 BD pump Gas Turbo w/ inner cooler 162 powerclaw EBC with tps hook up BD turbo pipe, wrapped, also have stock one TDR Reeds 2011 head, also have stock head 0 miles on fresh top end BD vented side covers HCR diamond drive RK Tech hood...

New Project build of a 2013 KTM 450 SXF. Turbo + Fuel Injection + Electric Start :) Baseline dyno of stock motor was 47 HP and 30 Ft-Lbs Torque. Thats + 5 HP more than the 2009 Honda CRF 450 we started with last year. A few pics of the build. Plenum, Clutch Lockout, Modified Clutch Cover.

Good Deal !! 09 M8 pump gas BD turbo 162 09 M8 BD pump gas turbo, EBC, inner cooler, BD wrapped turbo pipe, TDR reeds, 2011 head, Koso guage, 0 miles on fresh top end, 162 power claw, 2010 seat, holz reworked shocks, BD vented side covers, rk tech hood riser, guage console riser/tilt billet...

I'm running around mn and up mich with a nytro xtx push turbo(newly installed) that is reading between 15 to 16 on the air to fuel gauge. I have D&D adjustable weights, top 8100 rpms at 8 to 9 pounds of boost. Any ideas on how or why i'm running so lean?

Complete kit with turbo, waste gate, controller, programmer, sensors, exhaust and intake. Turbo came off 2008 Polaris RMK and is in great shape. 206-799-5441

This is a 2010 nytro se 162 with a mcx 240 pump kit. sled has ice age rails, skinz seat, skinz airframes running boards, mileage is 3500 ish, the sled is in need of a track as this one started to delam itself. starting price $10500