turbo

What kind of afrs are people seeing while cruising down the trail at around 6k rpms? Took mine out for a test ride last weekend after installing a turbo kit and was seeing crazy high number on the trail. At WOT I was around 12.5 but just cruising it was 19 to 20. Is this safe? Totally new to...

Selling this dealer demo 2010 Yamaha Nytro. The sled has 7,500 miles, but has been very well maintained and had a fresh engine at 6,000 miles. It has a like new camso accent 162"×15"×2.25" track on it. The turbo kit is a 330 hp MCXPRESS system that was professionally installed. It also has a...

My son acquired this sled on a trade and it is way more sled than his riding skills of one season is a good match for. 2008 Nitro with Impulse turbo kit, custom seat, fuel tank, CR Racing tunnel with 162 track. This sled is an absolute monster, it would be the ultimate in deep powder and and any...

Vipec for sale fits Polaris 800 from 2011-2015. Computer is open is you can do whatever you want to do. This thing can do about anything you want to do. sold Pro and went to a axys $600 shipped lower 48, will ship canada or alaska for little more.

Hey, Im new and was told to try joining here to see if I can find some input/help. Anyone with a boondocker turbo kit for a 2014 crf450r or close to that and have a base line or suggestions where to start with the fueling numbers and settings? Also what is a reliable boost level? Not looking for...

I have a 2016 M8000 with the factory team clutches. Working on installing a silber turbo and planning on running 5psi at 9,000 ft and above. I already have the venom adjustable weights and would like to keep them if possible to keep cost down. What else is needed or recomended for clutching...

2011 Polaris Pro 800 with Boondocker turbo. KC 711 King of the hill mod sled that year. Every upgrade imaginable. Boondocker intercooled tunnel exit turbo with 2012 upgrades, Walker Evans remote reservoir shocks all the way around, EZ Ryde suspension, Skinz bumpers and boards, 155" comp track...

hey guys, i have a 2011 Polaris assault 800 with an aerocharger 66 series turbo kit running 8psi. looking to have a little help clutching it as i am new to the turbo world. the sled trows a DET code when i try to pull a line off the trail or will throw the DET code first couple pulls of the day...

Evening gents.. I’m in need of some help! I just recently picked up a 14 pro with a boondocker on it. The guy fried the Torbo so i replaced that and did a new top end. I got it fired up and my gauge is showing me I’m running lean at idle so i got looking at my setting on my controller box and...

2016 Axys 2.6 155” VOHK Turbo 216 miles!!! Polaris Axys snowcheck 155” 2.6 track with VOHK Turbo, EGT, VOHK clutching all installed by VOHK, Chris Burandt Fox Shocks, skinz bumpers front and rear, will sell with Skinz ARC (not installed), Polaris GPS, TKI brake lever, only rode it 3 trips so...

Hello all, I decided to go turbo this year on my yz450 but didn't want to buy the KMS Turbo kit for 5k so, as a mechanical engineer, I decided to make my own kit and pocket a lot of savings. This thread will be my progress and its thouroughness will depend on the interest that I get. I feel...

OVS oil less RG turbo serious inquires call or text Tim @ (530) 308-0006

2013 ski-doo summit 154" 800 with an aerocharger non intercooled turbo set 8lbs. This is an xm chassis with the 2.5" flex edge track ( no missing lugs). Sled is not a trailer queen but it has been taken care of and is straight, 25xx miles on the sled, newer belt on the sled. I bought this sled...

Looking to sell my 2017 sidewinder mtx 162x3" the sled only has 377 mi comes with Yamaha extended warranty, C&A BTX skiis, yamaha aftermarket front bumper, goggle bag below gauge, tether, cover, viper steering post installed now but have stock one that will go with sled. I have had no problems...

Selling a 2015 Silber turbo kit with external wastegate and oil tank delete. Comes with adjustable clutch weights, two different boost gauges, reflashed ECU, 3 wastegate springs (3,5, and 7 psi), wastegate tool, and all other original parts. Turbo is still on sled and will be removed when...

2011 Polaris Pro 800 with Boondocker turbo. KC 711 King of the hill mod sled that year. Every upgrade imaginable. Boondocker intercooled tunnel exit turbo with 2012 upgrades, Walker Evans remote reservoir shocks all the way around, EZ Ryde suspension, Skinz bumpers and boards, 155" comp track...

Turbo pro project, Willing to deal or trade Gauging interest if anybody wants my project. Its a '12 155 pro chassis and a '14 motor, electronics, and silber turbo. For the chassis. It has around 2000 miles. Has better boards. Aftermarket rear bumper. No missing lugs on the track. '13 shorty...

I put a Kmod 155 rear suspension in my turbo axys and hate it right now. seems to push in the trees and took away the "flickability" of the sled. anyone else have this issue? been messing with the setup and just cant seem to get it right. rides awesome on the trails and no ski lift while...

cpc stage 2 running 10psi. can be turned down to 6 psi and run on pump gas,or turned up to 12 psi and run on race/pump gas mix. has around 200 miles on new top end. had cylinders re-plated by millennium. new primary clutch at same time. new reeds with ovs reed stops bdx oil injection delete...

Hi guys i am wondering what size of turbo i should run on my sled. I was thininkg about a polaris fst turbo since it's small and i could find one easily. Also what kind of bost could i run on pump gas? I'm at only 500-1500 ft over sea level.