Hi guys. I recently purchased a 2008 M1000 with 09 programming that has an aftermarket Y-pipe and can on it. I took it to the dealer and he suggested i ran an adjustable fuel pressure regulator in order to avoid detonation, as i ride from 2,000ft to 7,000ft in elevation.
I've installed a BDX...
So I bought my 09 M1000 with 800 miles on it, SLP pipe kit, over-sized air horn, PCV, cutler's clutching. The first ride it started doing something funny with the throttle like it wouldn't read the throttle, etc.
Long story short, the next ride the exhaust temp sensor went out, I bought the GM...
Hey i have a 09 M1000 with a boondocker box, last weekend i blew a belt and it totalled my servo motor (code 18) so i replaced the servo motor and now the sled starts and idles at 3100 Rpm and sounds terrible, (with or with out the new servo plugged in) and i know the new servos good because we...
So I did some testing last weekend on my sled. I've never had an issue with it before and I have ridden a few times this year. Halfway through the day it would die on me, it was like I hit the kill switch. It would start right up and run like a bat out of hell. It would start to die and I would...
Hey i have a 08 Sno Pro M8 with an Rkteck head on my bottom end. whole motor has 1200 miles on it.
Also included Speedwerx Pipe
Jaws Can
Boondocker box
and intake.
Looking for 2500 obo.
located in north Idaho
Can ship give me a call or text 208-819-3695.
Can send pictures.
So, I have an 09 M1000 Snopro 162. I've got the SLP pipe kit on it, Cutler's clutches and clutching, V-force 3 reeds. I bought it from a dealer this summer with 800 miles on it, and he didn't have an aftermarket intake??? So I don't wanna spend 200 bucks on the black boxx by BDX and I think...
Hello, I have a 2007 m1000 and I am in need of buying a whole new primary. I could go through cat but that is around 640 bucks. I was wondering if anyone here knows a site or place to order one (or even a person wanting to get rid of one). Also, I have heard of people doing the 4 post to 3 post...
I was wondering if anyone could e-mail the SLP maps for the PCV. I have an 09 M1000 with SLP pipe kit, cutlers secondary and adjustable weights.
I am dragging this sled in about 4 days and need to get it mapped for town level, about 5000 feet, it's mapped for probably 6-10,000 ft. I just...
2008 M1000 Arctic Cat 162in Track w/ Light Weight Kit
Started as a M Series and now has a 2010 Snow Pro Kit. Low miles, well maintained, and clean.
- Light Weight Flat Tunnel
- LED Tail Light
- Light Weight Mountain Seat
- 2-Wheel Kit
- New Hifax
- Powder Pro Skis (Orange)
- Handlebar...
Updated 2007 M1000 Mountain Sled. Motor and chassis around 1000 miles. Sled only ridden out west.
* Motor - Crank trued and welded, cylinders polished, head shaved. All work done by Northern Crankshaft in Thief River Falls. Runs awesome, massive torque. CPC twin pipes. Timbersled intake...
so i aired up my shocks to 72/75 in the front and 145 in the rear when it was warm out with no weight on it and took my sled up this morning (powder was insane!!!) and when the machine was cold and covered in snow i checked the pressure because it seemed pretty stiff front and rear and was...
I'm struggling to get mine sled tuned in. I have a Speedwerx single pipe and Y-pipe, MBRP can and BDX intake. I have a terrible bog around 6,000 that I can not seems to get rid of. It is really bad when you are trying to ride in deep powder and in and out of mid-range. If you have a map for...
i have a 08 m1000 snopro 162
i just got it and it has a slp can, y pipe,alot of venting ,aftermarket secondary, fox floats,newer seat, bar risers,gauge cage, ecu update
thats all the mods as far as i can tell
i was wondering if i can ditch the hood intake and keep the stock air box with a...
WTB new or in GOOD shape stock planetary gear set for -07 M1000.
GEAR,OUTPUT-5P-ASSY, p/n 1702-130
Let me know if you have anything and what you want for it.
Thanks!
2008 M1000 153 with around 400 miles on it. Located in Michigan but can work with you on shipping / delivery.
Sled is stock. Its not a sno pro, so it has fox floats in the skid but coil shocks in the front. sled is like new.
I bought the sled to ride at the Snowy range but I have decided...
Looking for a good set of used skis for my 2009 M1000. Private message me what you have and how much. Also have Boss seat for M series in good shape trade/offer. Thanks Greg
2008 M1000 Sno-Pro 162, excellent condition.
Clean sled, polished pipe
new hyper faxes
Top end only 600 miles on it!
slp Can
09 tunnel update( VE Tunnel)
slp intake
gauge cage
hand gaurds
2500 Miles
Great strong running sled only selling to upgrade to a newer sled. always indoors, asking $4950...
This is a factory Cat alignment tool that I bought for my 2009 M1000. Offset is 1.655, per the direction of Michelle at Oregon Trail. I received it and thought it would be pretty obvious to figure out, but I’m just not sure what the correct way of using it is! I feel pretty dumb starting a...