dragon

-2009 Assault (Red) Miles: 1000 Mods: RMX Kit done by Donavon (Xtreme) -RMX kit really livens this sled up, consists of a high compression head and a modded pipe. I think it adds 12+ HP on the conservative side. 2009 Factory OEM Flash, updated Polaris Pistons -SLP Can/silencer: This can...

F/S: 2009 polaris 800 Crank. SOLD Crank is in good shape. Not really sure what it's worth...$425ish maybe?

Looking for a used clutch for my 2009 800 Dragon. Any help out there, please? Will need shipped to Grand Junction or Cedaredge Colorado. Will pay with Paypal if possible; can send cash or use card. Thanks!

I have a 2008 dragon 800 with aerocharger. I was pulling a hill under full throttle and the sled lost all power but was still running. I turned it around and checked and replaced the plugs. Sled starts and idles fine. It seems fine under tip in but will not pull over 5000rpm and barely makes the...

While I was out riding this weekend my sled would pulse in and out of power while I was WOT. Didnt matter if I was on the trail or in deep powder climbing a hill. It would go up past 8000 rpms and then surge down to around 6800 and back up. I checked the plugs and belt-everything looked good...

2008 Polaris 800 Dragon 163 with 1618 miles. Very clean...Call Shane at 208-230-1026. Only $6099.00

SOLD I'm no longer am in need of this kit, I installed a turbo. Used 1 season with perfect results. It comes with the 5lb carbon fiber bottle, fuel tank for the injectors, control box, switches and needed wiring. Check out my install thread to see what it looks like. It's installed into a 2009...

dragon hood from an 09 800 dragon still has all foil and foam. Also has factory dragon graphics. Overall hood is in realy good shape some scratches. asking $350.00 plus buyer pays for shipping or we can add it to price and I will ship it. Call me at 208-697-3481 or pm me.

2010 Polaris Dragon with Carl's Cycle 860 kit, only 550 miles, Fox Evol shocks on the front, Fox Floats in the rear, 156 2.5 Camo extreme track, better boards & seat bag. Runs hard! $8700.

Has anyone had problems removing the clutch from a 2009 Polaris Dragon?:face-icon-small-sad

Hello all, I have looked and looked and looked I have had several issues and I think some may be related so I am going to do my best to describe them. So today we went and rode it was -5 F and they did not want to start I had to give them a little throttle and pull which I thought was odd for a...

2010 Dragon Great shape. Runs strong 800 miles currently (still riding) Has SLP Stage 4 which includes Porting Pipe reeds intake Power domes and clutching. Around 167 horsepower. Uses 91 octane fuel. Head is for 6000 feet or above. Sled looks and runs great. some small tree scratches is all that...

2005 Arctic Cat M with a Cutler Performance Center Dragon 1000cc , Holz suspension, Cutler twin pipes, CPC 46 mm carbs, CPC clutching, fresh-mesh air intake, CPC throttle, EGTs, Arctic Cat competition track. Fly Bars, 220HP, 138ft lb torque. Motor runs well, temps always 110 -125f, clutched for...

I have been watching the PCV threads for quite a while now and not sure what to do. First off a little background on the sled, riding areas, etc...I bought a 09 163" dragon last year and have over 500 flawless miles on it (knocking on wood now). It got the update in November of '09 along with...

I am so tired of hearing everyone's terrible luck with the dragon 800 motors. I unfortunately am a victim of Polaris's absolute fail of a product along with MANY other people. They know they have a problem, it has been well documented, and they even tried to release an "update" that has done...

What do u guys think a skinz mesh hood or just a lexan one for a dragon??

This motor is sold I have a complete Cutler 1000 motor for an M6-7 chassis that I am looking to sell. The problem is, the crank is ready to break (has an obvious crack) and the top end needs to be sent to be recoated or to Cutler for a core. One is scuffed mildly and the other has a chunk of...

2008 POLARIS 800 RMK DRAGON BUILT CUSTOM FOR SNOW SHOWS 75 TEST MILES ONLY ON SLED/ LIKE NEW CONDITION BUILT TO RUN ON PUMP GAS/ DYNO AT 168+ H.P. W/ ELECTRONIC REVERSE SLP SINGLE PIPE BILLET HEAD 13.5 TO 1 CYLINDER AND CASE PORTING BY SLP ECU REPROGRAMMED CUSTOM MAP MATCHED TO ENGINE V-FORCE...

155 Track, Very well maintained, 19 tooth Gear, Titanium Reeds, Stiff Rear Sus Spring, Snow Eliminators, Cover, HPS CAN 1507 Miles Evergreen, Colorado Under seat bag call please - i don't check PM's that often.. 303-229-0549

SOLD! Make me an offer I can't refuse- sled is in the Bay Area of CA. SLP Ceramic pipe/can & intake, RK-Tek head, BD box, CPC snow eliminators, Boss seat, Lefty's, 4" riser, Sled Junky clutch kit & a TON of vents. Runs on pump gas. New Diamond Drive (zero miles) Sled has ~1000 miles (I'll...