800

I have a 2010 800RMK with the 144". i am looking to possibly put some SLP pipes on it. i came across a set of twin pipes for a '09 (polaris) dragon 800 and was wondering if they would work on my '10 800 RMK in the IQ chassis. Also if i did that would i have to buy a power commander or something...

I am considering buying a 05 summit 800 with 2000 miles on it for around 3000 bucks. It is not rebuilt and I am concerned about engine reliability and am wondering what to look for as far as problems it might have. It is summer so I can't get a test drive. Wondering how many more miles it has...

I have a 2012 pro 800 that I want to do some upgrades on but don't know of any shops that are highly recommended. I am located in redding ca. There are no shops here that sell or work on polaris. The closest is in Chico and they don't know **** about sleds. I am willing to travel into Oregon...

I have a 2006 rev 151 800ptek, it has a fair amount of mods but i was wondering what else i could do with it to improve the power, and the HP response? Any other mods that you can think of that are fairly cheap please tell me. Thanks!

Hi. I gernaded my motor in my 2011 800 Pro RMK with a turbo... Sucks... Anyone have a motor for sale? I busted a cylinder skirt, and the rest is history. Any help or advice would be appreciated. Thanks!

My preowned sled has an aftermarket driven side clutch that has an adjuster bolt/wheel/nut combo that started backing out by itself while riding. Any idea how to keep it in place? I attached a photo showing the clutch. It's got a billeted/textured hand tightener wheel and lock nut on a bolt...

I have a 2011 Summit 800 with a 146'' track it currently has around 820 miles but could change but not much. The sled has a can on it, a vent kit, skinz running boards which are the best aftermarket part I have ever put on a sled. It has been a great sled never had a problem with it just looking...

For sale is a stock Summit XP 800 with 154" track. $6900 OBO. Sled has been well maintained and stored indoors when not in use. It has 934 miles all ridden on trail by my mother. Sled runs well and pulls hard when needed. Also has a tunnel rack for gas or gear bags. Located in West Richland WA...

2009 Polaris Dragon 800 Snowmobile, 163" Track. 1800 Miles - $5000 (Ellensburg WA) 2009 Polaris Dragon 800 runs great, put on about 200 miles this winter. 1800 total miles on the sled. Mostly trail ridden. The engine update was completed in 2009 (new pistons and new cylinder head) at Colville...

Very clean 2007 m8 162. Has boondocker race gas kit currently tuned down to 9 psi on a race gas pump gas mix. Timbersled rear suspension have 2.25 challenger and 2.25 power claw. Have spare diamond drive as well as spare cylinder. Powder pro skis. Oil injection deleted. Much more! Runs awesome...

2013 POLARIS PRO 800 WITH THE 163" TRACK. HAS CHRIS BURANT WRAP, BURANT TUNNEL BAG, UNDER SEAT BAG, INSTRUMENT CLUSTER WARMER BAG, UNDER HOOD GLOVE/GOGGLE DRYER BAG AND LEFT HAND THROTTLE. ALSO HAS A 3 YEAR POLARIS BUMPER TO BUMPER WARRANTY. LESS THAN 500 MILES. ASKING $10750 CALL BOB @ 775-741-9447

Lost my Carls 660 to crank bearing failure. :( Now need something to bolt in to replace it... anybody got anything from that era that's reliable for sale? PM me. I'm located on the Wasatch Front, willing to pick up within reason.

This tool is used to safely remove the water pump impeller without damage. 49.99$ shipped to USA PM if interested.

sold Sold

See add at http://helena.craigslist.org/sno/4296509148.html Thanks!

So I was riding my 03 pro-x 800 and it had been running perfect all day. Went inside for a hour came back out went on the lake and it started backfiring really bad, died and couldn't start again. I did unplug the tps and i was able to get it started but it ran really bad. But it did run. It has...

So I have a 03 pro-x 800. Every time I hit a drift snow gets in the air box then it will run like ****. All of my filters are good, and the seals between the carbs and the air box. I can't figure out how it's getting in there and it's very frustrating because everytime I have to take it apart...

So I have a 03 pro-x 800 and I found a slp manifold pipe and can. It's off a 03 RMK 800, and he says it would work on my sled. Would it?

Hey i have a 08 Sno Pro M8 with an Rkteck head on my bottom end. whole motor has 1200 miles on it. Also included Speedwerx Pipe Jaws Can Boondocker box and intake. Looking for 2500 obo. located in north Idaho Can ship give me a call or text 208-819-3695. Can send pictures.

2008 Polaris Switchback 136" Four Stroke Turbo. Sled has 4??? Miles on it. The snowmobile is in great shape and very clean. It has quite a list of modifications and has always been completely reliable. This is a turn key and go snowmobile. Have all paperwork, owners manual, and a book of...