Rear suspension mount points measurements 2013 proclimb

[mckinney]

Does anybody have the measurement between the two rear suspension mount bolts for a 2013 proclimb? Reason asking is that suspension is going in another sled.


mckinney

 

[boondocker97]

31-1/4"

 

[mckinney]

31-1/4"

Thank you!


Sent from my iPhone using Tapatalk

 

[jarred kale]

Does anybody have the measurement between the two rear suspension mount Kodi bolts for a 2013 proclimb? Reason asking is that suspension is going in another sled.


mckinney

Share a photo for that sled

 

[mckinney]

Share a photo for that sled

Here is what I have. I have the spacing set at 31.25. It sits low and the rear swing arm is not near vertical. Have 75 psi in rear shock.

Sent from my iPhone using Tapatalk

 

[boondocker97]

That skid in a Cat would have 125-150psi in the rear shock depending on rider weight. Might want to consider adding the braces to the rails at the front arm connection that the 4 strokes and HCR had and then were standard across the board after 2015.

 

[mckinney]

I will pump more air pressure into the shock and see.It seems to have a lot of sag before the shock comes into play. Also look into the braces. Thanks