reclutch 09 m8 SLP pipe ???

[montanasledder]

Ordered the slp intake and gonna get the pipe coming soon, What did everyone do for clutching? I not real fond of the MTX weights, Can i just change weights? whats weights, spring,etc. should i order? I like the way the sled pulls now but realize i need more RPM's with the pipe.

thanks everyone

 

[JasonAK]

Install the pipe kit and the intake. Go ride it, note the rpm. Then use stock cat wieghts to dial it in. Try to target 8050 in a climb. I have tried the mtx wieghts, waste of money. If you need to you can grind the side of the stock cat wieghts.

Jason

 

[XFIRE800]

I havent done anything with clutching with my pipe yet either, I have just rode up and down the ditch a few times here since theres almost no snow. What weights should i be running for 0-3000'?

 

[JasonAK]

What is your top RPM now?

Jason

 

[Bacon]

What does everyone not like about the MTX weights? I run them with my SLP pipe setup and it works awesome.

 

[XFIRE800]

It was really hard to see since i was in a rough hardpack ditch but i think about 7700-8000, i had it on analog bcuz there was no was i was gonna see the digital.

 

[JasonAK]

It was really hard to see since i was in a rough hardpack ditch but i think about 7700-8000, i had it on analog bcuz there was no was i was gonna see the digital.

There is a function on the stock speedo that shows max rpm. You need to reset it and then do a WOT run. Then check. I would assume you are running 77 Gram weights in the primary now.

Jason

 

[XFIRE800]

If 77's are what come in it then yes thats what im running, How do you do the max rpm thing on the speedo?

 

[iluv2fly]

Drop 2-3G off the stock wieghts and you should be good to go. You want to see at least 8000rpm and that is in a climb not on the trail. I overrev a little on the trail and hit 8000 on the hill.

 

[kane13]

My sled came with 73 gram weights and it worked perfect at 4000ft or so i was reving about 7650 before pipe 8000-8100 after.

 

[Frostbite]

I'm running 73 gram weights with the SLP single and turning 8010 RPM while climbing. The sled only has 50-60 miles on it so I assume I'll be closer to 8,100RPM shortly, which is the target RPM for the SLP pipe.

 

[iluv2fly]

I'm running 73 gram weights with the SLP single and turning 8010 RPM while climbing. The sled only has 50-60 miles on it so I assume I'll be closer to 8,100RPM shortly, which is the target RPM for the SLP pipe.

What altitude do you ride at?

 

[Frostbite]

I ride at 4-7,000 feet most of the time. I would say at 5,000-5,500 feet most of the time.