T
Hello!
I need a bit of advice on what to do with my team tied setup on my 2014 polaris pro rmk 800.
The clutches are running so hot I can barely touch them. The belt is actually starting to delaminate due to the heat.
I'm running 11-66 weights with a 120-340 primary spring.
73-59.36 helix and a red/black 140-240 210176 spring in the tied.
Primary engages at 3800-3900rpm and I get between 8200-8350 rpm on top.
Polaris series 6 track.
Altitude up to 1000m/3000ft and alot of tree riding..
Alignment is fine, secondary float is 3,5mm..
I haven't got a reply back from team, so I need some suggestions on where to start. Hard to tell wich clutch is the hottest..
Thanks!
I need a bit of advice on what to do with my team tied setup on my 2014 polaris pro rmk 800.
The clutches are running so hot I can barely touch them. The belt is actually starting to delaminate due to the heat.
I'm running 11-66 weights with a 120-340 primary spring.
73-59.36 helix and a red/black 140-240 210176 spring in the tied.
Primary engages at 3800-3900rpm and I get between 8200-8350 rpm on top.
Polaris series 6 track.
Altitude up to 1000m/3000ft and alot of tree riding..
Alignment is fine, secondary float is 3,5mm..
I haven't got a reply back from team, so I need some suggestions on where to start. Hard to tell wich clutch is the hottest..
Thanks!