Need help with 02 700RMK clutching

[Graveyarder]

Helping a friend with his 02 700RMK and would like to know what a good set-up would be. It has a silver/blue in the secondary in 3rd hole of an R8 helix and a black primary spring. Not sure what weights are in it yet still having trouble getting primary off. He has a pipe and can on it, but everything else appears to be stock. We ride usually from 3000 to 7000ft.

 

[winter brew]

Keep that secondary settup and get a Almond round sprimary spring and as much weight as it will pull on a clib...probably 10-62's. A SLP black/grey secondary spring with the R-8 may be a slight improvement also. What length track?

 

[Graveyarder]

It's a 144x2". Got any tricks on getting the primary off? I don't think it's been off in a long time. I have a 2000 700RMK just wasn't sure if they ran about the same set-up. I'm running 10-60's with black/white primary, team roller secondary with red/black I believe, slp single, boysen reeds, and geared 19/42 turning a 151x2". Thanks for your input winter brew.

 

[FEZ]

Impact on the clutch puller until it won't go any more, apply heat to the clutch, whack the puller with a 3# mallet 3 times, impact some more, heat some more, whack it again a couple times, repeat if necessary.


As for the clutching, what Winter Brew said.

 

[rumblebee]

clutch help

Like Fez says to pull the clutch, just make sure you TAP on the end of the puller only like you are hitting a nail, and I would switch to a team secondary clutch, much improved shift quality and will outclimb the button sec. hands down. Got one to sell if anyone is looking.

 

[Top That]

Team secondary Did make quite a difference. Completely changed the view of riding for me. my sled became quick and snappy and pulled up hills pretty dam good for an ol 700 144. beat many M7's after i switched to the team. Good luck- me sled is for for sale and up for grabs- bought me a new Drago