T
So i picked up a 02 Vertical Edge a few days ago, it's got jaws twin pipes and wire harness from the chassie to the hood got a little to close and melted a bunch of wires. I've since cut out all the melted wire and spliced new wire to complete the harness, I Checked all the chassie grounds! but I'm still having a problem with the tach and prem fuel light. The tach works great at idle and the prem light is solid yellow. when I start to rev the motor a little over 3K RPM's the tach shoots to 0 and the prem fuel light starts to flicker?
The sled also has the speedo removed for an intake, and I can't seem to get the head lights to work either? At the bottom of the hood harness, there is a 3 prong plug with a white wire/Orange tracer, Orange wire/W black tracer etc. I can't seem to find the female end of the plug in the chassie? There is a white wire with orange tracer coming out of the main harness as a single lead for the prem fuel light.
I not really to concerned about the headlights, I'm looking to delete them anyway for a little more weight savings. I do need to get the tach functioning tho! Any help or ideas would be great!
The sled also has the speedo removed for an intake, and I can't seem to get the head lights to work either? At the bottom of the hood harness, there is a 3 prong plug with a white wire/Orange tracer, Orange wire/W black tracer etc. I can't seem to find the female end of the plug in the chassie? There is a white wire with orange tracer coming out of the main harness as a single lead for the prem fuel light.
I not really to concerned about the headlights, I'm looking to delete them anyway for a little more weight savings. I do need to get the tach functioning tho! Any help or ideas would be great!