i just bought a 2.25 141 power claw for my 09 xfire 800. i got some slide kicks scratchers (reverse capable) and a bdx 2 wheel kit. Is there any thing else i need to do, like different clutch weights or anything?
just got a powerclaw, do i need to change anything?
- Thread starter XFIRE800
- Start date
K
UNless you bought billet wheels for your wheel kit, pull the black wheels out of the middle, and replace them with the orange outside bogies... set the tension on your track and HAMMER!
wouldn't think you'd need to reclutch as long as your staying with the same length.
Thanks for the replies
p claw
When I put on the pclaw track I needed a little more spring pressure on the secondary spring on my M8, track was hooking with p claw......old track just was spinning, I use the 05 helix so........3/4 turn on the plastic adjuster was good. Then..........gearing the sled down was a much better mod than gearing it down with the spinning stock strack which probably works better with the high stock gearing.
When I put on the pclaw track I needed a little more spring pressure on the secondary spring on my M8, track was hooking with p claw......old track just was spinning, I use the 05 helix so........3/4 turn on the plastic adjuster was good. Then..........gearing the sled down was a much better mod than gearing it down with the spinning stock strack which probably works better with the high stock gearing.
Similar threads
