Can anyone explain how to fog the engine of the Axys for summer storage. I've been on ETECs for 7 years, which have auto-fogging for summer so its been awhile since i've done this. In the past, i believe i just sprayed the fogging oil into the air intake but it was an older sled and a long time ago.
I checked the manual, which says to refer to the fogging oil bottle for instructions. So I've got the polaris fogging oil and it says to spray directly into the carb but i'm very unsure on how to do this.
Also, is there anything else i should do for summerization? Its stored in a garage and i block the exhaust off so mice don't get in.
Any pictures would help alot as well. Thanks in advance.
I checked the manual, which says to refer to the fogging oil bottle for instructions. So I've got the polaris fogging oil and it says to spray directly into the carb but i'm very unsure on how to do this.
Also, is there anything else i should do for summerization? Its stored in a garage and i block the exhaust off so mice don't get in.
Any pictures would help alot as well. Thanks in advance.