Vipex Viper MTX
This is a full custom build. Billet bulkhead with a tube front suspension subframe. Billet side plates with nytro style chain case built in. Apex motor with a water to air intercooled with a mid mount gtx 2863 with a boost it fuel controller. Front suspension has billet knuckles that are 3" shorter than stock with custom a arms. Rear suspension brackets fasten to bulkhead. Billet running boards. 3" 162 with racers edge skid. This is the perfect apex conversion chassis.
After seeing and using Steve's product for a couple years he told me about this project and I decided to jump in and get him to build my custom sled. This sled was well thought out with the selection of components and product.
The requirement that I had was a nimble sled that had alot of power with stock motor and pump gas. I wanted a 4 stroke that was maneuverable and not a chute sled. Been there done that, I wanted something for the real world days regardless of conditions. When we travel 10-14 hours just to get to the hills I want to ride all day regardless of conditions and not be played out at the end of the day if forced to ride technical because of visibility. But powerful enough to play in the chutes on those bluebird days. Also high on the priority I wanted a sled that was somewhat a sleeper, I wanted it to look as stock as possible so at first glance it would get overlooked yet those with an in tune eye would take a second look. This project is not 100% finished yet and is planned to be very soon, the bars are too tall, windshield, and front bumper are yet to finish as well as the fine tuning.
Unfortunately I do not live near Steve and have yet to ride it, but hear it is incredible with the positioning of mass, 36" stance and skid/shock setup.
I've been talking with Steve on another project and I am now considering selling this sled. If there is some serious interest you can pm me with your thoughts.
For anyone serious you will know that to build a sled like this is beyond your typical 'throw a turbo on it at the dealership' sled this is a full custom sled that has replaceable components. It is not a tube chassis that is tough to repair. All chassis components were jigged and programmed so replacing a piece of the chassis is possible.
List of components Boost It Fuel system, Baker skid, Elka stage 5, 162x3x16, mountain mod seat, 2863 garrett, water to air, Koso X2 gauge, sly dog powder hounds, 36" ski stance, Yes it has reverse.
For serious esquires 780-791-0060 Four Seasons Power Sports, Gene