any suggestions for Gripper aggressive bars?

[byeatts]

looking for a more aggressive wear bars with carbides? perhaps the square bars from woodys, for the Pro grippers?

 

[MORSNO]

On the IQ RMK's some guys were installing Woody's with a 2" longer carbide for added control. If you look at how the ski sits on a hard surface like ice, only the back edge of the factory 4" carbide is touching. The 6" carbide gave a longer edge to dig in without being too aggressive on a RMK.

 

[byeatts]

On the IQ RMK's some guys were installing Woody's with a 2" longer carbide for added control. If you look at how the ski sits on a hard surface like ice, only the back edge of the factory 4" carbide is touching. The 6" carbide gave a longer edge to dig in without being too aggressive on a RMK.

being a shallow keel ski i believe a square bar will enhance steering as well if woodys makes that with carbides?

 

[MORSNO]

being a shallow keel ski i believe a square bar will enhance steering as well if woodys makes that with carbides?

It's worth a shot! Give it a try and let us know how it works out, I'm open to new ideas.

 

[byeatts]

It's worth a shot! Give it a try and let us know how it works out, I'm open to new ideas.

Woodys dosnt make a square bar for the Gripper, Looking for other brands that may fit,, anyone?

 

[byeatts]

Woodys dosnt make a square bar for the Gripper, Looking for other brands that may fit,, anyone?

Found them . They are Shaper bars. in 6 and 7.5 inch