900 RMK SLP pipe without the SLP intake

[Dogmeat]

Ok, I have screwed with this to no avail ...

The reason I can't get this to work with the offset boots is simply because "standard" hose clamps of that diameter won't clear the crossmember, and I'm not about to cut or trim that...

Does anyone know where I can get "slim" hose clamps that will clear the crossmember? The standard auto ones wont work.

 

[IceCap]

Don't worry about trimming the crossmember, I trimmed mine so I could remove the SLP air box(easier) every season to reseal it.
I found that the boost box will warp a little every season and cause a lot of air sucking in around the box where the air box is sealed to the boost box.
I had to build a internal support for the boost box so it will retain its original oval shape.

 

[Dogmeat]

guess I could try zip ties instead of hose clamps, hahaha...