09 M1000 Clutching

[wes-c]

I have an 09 M1000. I put a SLP y pipe, pipe and can on the sled with an Attitude control box. I dropped the weights to 77 g and it pulls 7600 RPM for the most part. My question is: Would putting a different helix and springs help me even more to get more hp to the track? My brother has an 09 dragon and i'm just barely beating him when with 200 more cc's I should be killing him with no problem. What setup should I switch to if any? (I ride at 8000-1000 ft and weigh 185).

 

[cheeky]

tttt

my buddy has the same sled and setup, he is running 74 g in the primary and a a slp 44/36 helix. The sled seems to rip

 

[tcpeterson]

I have an 09 M1000. I put a SLP y pipe, pipe and can on the sled with an Attitude control box. I dropped the weights to 77 g and it pulls 7600 RPM for the most part. My question is: Would putting a different helix and springs help me even more to get more hp to the track? My brother has an 09 dragon and i'm just barely beating him when with 200 more cc's I should be killing him with no problem. What setup should I switch to if any? (I ride at 8000-1000 ft and weigh 185).

My M1000 is primarily stock, i put a 44/40 helix, 75g weights, org/wht primary spring, i weight about 230 w/gear and i was putting the spanking on a D8 this last weekend. You might need to drop the weights a little if you change the helix but sometimes it is just guess and check.