C
This is a backup sled we put away last year running fine, with stabilizer. Now can't get it to start. It'll run with a squirt of ether but after that nothing. I tried taking the fuel line off the rail and getting some sea foam in there thinking the injectors are gummed up but that didn't seem to work. The heads on the screws on the rail that holds the injectors on are stripped so thats where I stopped. The fuel pump seems to be working as fuel is circulating when it fires on ether. Changed the plugs too. Assuming I can get the stripped scerews out and the injectors off is there an easy way to clean them, see if they are working properly? What else to try?
I have another pump from a spare tank I have that I can swap but didn't wanna mess with that until last resort.
I have another pump from a spare tank I have that I can swap but didn't wanna mess with that until last resort.