2005 900 50th
slp single/slp can
slp air intake
dragon skis
slp single/slp can
slp air intake
dragon skis
Pics of modified 900's lets see them!
- Thread starter Kootenay-Stomper
- Start date
very nice! I will post ours in a bit.
I haev applied similar heat protection to the wiring around the SLP pipe on both of our 05's with the SLP airbox it necessary.
I also protected the exhaust heat sensor wires right where they leave the sensor (split rubber hose/zip ties) the hood likes to pinch these wires
Nice sled! I KNOW it rips
I haev applied similar heat protection to the wiring around the SLP pipe on both of our 05's with the SLP airbox it necessary.
I also protected the exhaust heat sensor wires right where they leave the sensor (split rubber hose/zip ties) the hood likes to pinch these wires
Nice sled! I KNOW it rips
C
Clarke673
Somewhere between too dumb to quit and flat earth
Hear are some of my sled and me. I just bought it a few days ago. Hear are some stats
2005 Polaris 900 RMK 159"
2006 Polaris 900 engine
Boss Seat
SLP Pipe
SLP Can
SLP Air Box
SLP Vents
SLP Screen kit
Big Wheel kit
Idler Wheels removed
Ice scratches
V-Force 3 Reads
SLP Head
Custom vents
2" Handel bar riser
____________________
And soon to be custom painted hood!
Hear is the color that the hood will be http://farm1.static.flickr.com/49/148695249_360a2aedaf_m.jpg
Im going to take alot of good pics tonight. I hit a frozen snowbank in west yellowstone and it turns out i broke all the rivets out of the left side of the belley pan so later tonight i am going ot replace them with bolts and i have to mess with my secondary.
EDIT: I added a pic of me on my friends 08 700. It had 14 miles on it and he was complaining that it didn't jump good... so i tested her out
2005 Polaris 900 RMK 159"
2006 Polaris 900 engine
Boss Seat
SLP Pipe
SLP Can
SLP Air Box
SLP Vents
SLP Screen kit
Big Wheel kit
Idler Wheels removed
Ice scratches
V-Force 3 Reads
SLP Head
Custom vents
2" Handel bar riser
____________________
And soon to be custom painted hood!
Hear is the color that the hood will be http://farm1.static.flickr.com/49/148695249_360a2aedaf_m.jpg
Im going to take alot of good pics tonight. I hit a frozen snowbank in west yellowstone and it turns out i broke all the rivets out of the left side of the belley pan so later tonight i am going ot replace them with bolts and i have to mess with my secondary.
EDIT: I added a pic of me on my friends 08 700. It had 14 miles on it and he was complaining that it didn't jump good... so i tested her out
Last edited:
C-man...I don't care about the boats, but I like the shop!
Who's bumper is that on your 900, & how is it mounted? It looks a little like the TCP bumper.
Last edited:
P
polaris1
Member
i like the flat black look nice sled
This is a TCP bumper and it mounted in the typicay fashion other than I left the belly pany and lower parts of the fender on as mant are doing these days I am going to get a skins float plat and betwwen the to It will be bulletproof
The black is Just cheap Krylon (I hate friggin red )
The black is Just cheap Krylon (I hate friggin red )
Could you post a few more pics of your bumper installation.
A
Anthony Oberti
Well-known member
I think the kill switch is the only thing that is still stock
now thats nice,keep them up!
hear is my 900 it alittle dirty just go done with some maitenance
Last edited:
C
Clarke673
Somewhere between too dumb to quit and flat earth
Hay ACE 900. If i were you i would rap those wires in eletricle tape to make your bars look better and to pertect the connections from water or getting ripped off. Also, you should just pull your extra connectors down underneath the hood. I ziptied mine to the fuel tank vent line. In my pic, just ignore the yellow cord, its not part of hte set up
Last edited:
Similar threads
