I have an extra rail cross shaft brace I made myself and had one left over. It is made out of 6061 Aluminum matched to the stock Axys shaft width. Tapped for and includes M6 Bolts & washers (stock shaft between rear torque arm and rear axle uses M10 bolts). I added mine in front of the rear torque arm to help hold the rails together on hard impacts, had to drill my rails out for it which is why I went with a smaller bolt since there is a small surface area to mount it. $30 shipped.
![20151005_003536.jpg 20151005_003536.jpg](https://www.snowest.com/forum/data/attachments/209/209780-9f28e1934e78f286f33a8aa62750a567.jpg?hash=nyjhk0548o)
![20151118_135053.jpg 20151118_135053.jpg](https://www.snowest.com/forum/data/attachments/209/209771-6c67c295611dbf656b095b914072b673.jpg?hash=bGfClWEdv2)
![20151005_003536.jpg 20151005_003536.jpg](https://www.snowest.com/forum/data/attachments/209/209780-9f28e1934e78f286f33a8aa62750a567.jpg?hash=nyjhk0548o)
Last edited: