H
VE has been great to deal with, although I needed to cut some stuff to make if fit better, not sure if they sell a better fit for the newer 08/09/10....but i dont have the time to ship stuff back, this stuff will fit the 07 and older just fine
Rob with Better Boards is a class act, spoke with him over the phone and was pleased with what he had to say and him standing behind his product
With all said, a few minor modifications are needed for my application, no big deal, its getting powder coat anyways.
Under, i used more rivots then most will use, this makes it a bit stronger
, i also made sure everything was smooth and no sharp corners or edges, use a round file and have fun
Had to cut the VE Bumper peice a bit, as it wont vit over the newer M inside angle channel thingy
Notice the better boards fit somewhat under the VE board edges, this is a good thing![Beer :beer; :beer;](https://www.snowest.com/forum/images/smilies/beer.gif)
Most of the tools i needed, gotta love harbor freight, VE sells the needed hammer tool, buy the hammer gun at harbor![Beer :beer; :beer;](https://www.snowest.com/forum/images/smilies/beer.gif)
Use clamps before to rivot, i used hammer rivots
I left as much stock meat as i could
Clean up those rivot holes
Rob with Better Boards is a class act, spoke with him over the phone and was pleased with what he had to say and him standing behind his product
With all said, a few minor modifications are needed for my application, no big deal, its getting powder coat anyways.
![BB8.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB8.jpg)
Under, i used more rivots then most will use, this makes it a bit stronger
![BB7.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB7.jpg)
Had to cut the VE Bumper peice a bit, as it wont vit over the newer M inside angle channel thingy
![BB6.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB6.jpg)
Notice the better boards fit somewhat under the VE board edges, this is a good thing
![Beer :beer; :beer;](https://www.snowest.com/forum/images/smilies/beer.gif)
![BB5.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB5.jpg)
Most of the tools i needed, gotta love harbor freight, VE sells the needed hammer tool, buy the hammer gun at harbor
![Beer :beer; :beer;](https://www.snowest.com/forum/images/smilies/beer.gif)
![BB4.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB4.jpg)
Use clamps before to rivot, i used hammer rivots
![BB3.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB3.jpg)
I left as much stock meat as i could
![BB2.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB2.jpg)
Clean up those rivot holes
![BB.jpg](http://i43.photobucket.com/albums/e384/hatchers/M8%20mod%20build/BB.jpg)