ZBROZ Installation

[kidder17]

Just picked up my 39" Kit.

Just wondering about the tie rods that come with it. Do they need to be installed? or can the factory one's be left in?

 

[kmo]

I left the factory ones in, and from what I have heard most people are doing the same.

 

[RMK-King]

I reused my factory ones. If you were putting this front end on a Assault or something you would need to change tie rods.

 

[Ken Climb]

Does anybody have some pics that show's how much I have to grind down my spindle's with these'e Z-bros arms?

 

[kidder17]

Does anybody have some pics that show's how much I have to grind down my spindle's with these'e Z-bros arms?

I did my install this weekend. 39" Kit on a 155 SKS. No grinding was needed and I re-used the factory tie-rods as per above.

 

[FactoryAir1]

I did my install this weekend. 39" Kit on a 155 SKS. No grinding was needed and I re-used the factory tie-rods as per above.

No binding at full extension (on a stand)?

 

[skibreeze]

No binding at full extension (on a stand)?

Grinding is only necessary with the 36" kits.

 

[kmo]

Does anybody have some pics that show's how much I have to grind down my spindle's with these'e Z-bros arms?

Straight from the manufacturers mouth, grinding is not need on the 39" nor do you need to use washers to shim. That's only needed on the 37" kits.

BTW, I have two sets of the 39" for sale, ball joints and bushings installed.

 

[Ken Climb]

These "techy"a-arms had to go. They just held a we bit to much snow. You think?

Anyway, a bit of a marathon installing my zebro's 36" a arms last night. The second side went much quicker. Nice fit and Finnish. Also, this axys chassis are so nice to work on. Well thought out.

Using my stock shocks it raised the front of the sled a good inch. I'm thinking I'll transfer my fox evols off my 14 pro.
I forget what pressure to run in those evols. They were the last year before they went to kashima coating. If anybody has a baseline please let me know.






Sent from my iPhone using Tapatalk

 

[JJ_0909]

These "techy"a-arms had to go. They just held a we bit to much snow. You think?

Anyway, a bit of a marathon installing my zebro's 36" a arms last night. The second side went much quicker. Nice fit and Finnish. Also, this axys chassis are so nice to work on. Well thought out.

Using my stock shocks it raised the front of the sled a good inch. I'm thinking I'll transfer my fox evols off my 14 pro.
I forget what pressure to run in those evols. They were the last year before they went to kashima coating. If anybody has a baseline please let me know.






Sent from my iPhone using Tapatalk

how much grinding did you end up doing? Pics?

 

[Ken Climb]

http://images.tapatalk-cdn.com/15/12/08/96c433a297961d22c7eb2325ba0beeef.jpg[/

She's friggn jacked!


Sent from my iPhone using Tapatalk

 

[Ken Climb]

Woah evol's.....That looks better!
Adjusted the ride height down a bit with lower air pressure..... Now we'll have to see how it rides.


Sent from my iPhone using Tapatalk